Model Number

YW7100W

Interface Parameters:

--------------------------------------------------------------------------------

1.        Interface of antenna
2.        Data transmission indicator of Wireless LAN (WLAN)
3.        Connection status indicator of WLAN
4.        Alarm output terminals A, B
5.        Alarm input terminal
6.        Alarm input earth terminal
7.        Plus and minus terminals of RS485 interface
8.        Power socket, DC12V, 1.0A
9.        Reset Button
10.      Power indicator light, lightening means fine power system
11.      System status indicator, twinkle means system working fine.
12.      System switch: SW 1bit Not Off: normal start        Switch On: emergent start
          a)        SW 2bit Not Off: normal start           Switch On: system parameter initialization
13.      RJ45 network interface: Yellow light refers fine network connection; twinkle of green light refers status of network data.

--------------------------------------------------------------------------------

Lens Parameters:

1 / 3 SONY CCD, 420 lines (optional, optional 1 / 3 Sony CCD, 520 lines, etc.)

Basic Parameters:
Frame rate: PAL:1-25fps.NTSC:1-30fps
Video codec: H.264
Audio codec: G.722
Size: D1:704*576, HalfD1:704*288, CIF:352*288
Video bit rate: 32kbps-3mbps
Video stream channel bandwidth: 200kbps(352*288,25fps per 1ch)
Delay time: less than 200 MSEL(0.20 second) in Lan system
Resolution: 704*576(P) 704*480(N) 704*288(P) 704*240(N) 352*288(P) 352*240(N)
Image adjust: brightness,contrast,chroma,saturation, image quality can be adjusted.
Output frame rate is 30fps at most and network bandwidth usage is 32kbps at least
Interface: RS485 P/T/Z decoder interface, RJ-45 10M/100M Ethernet interface, COM
Network Protocol: TCP/IP, UDP, MULTICAST
Network transmission mode: ISDN, ADSL, LAN, WAN
Built-in Web NV: it fully supports IE monitoring, configuration and updating, so that it is characterized by simple and convenient operation
Dynamic IP: support internet connection assigned with dynamic IP address
Video input: 1CH PAL/NTSC composite or digital(ITU-656)
Stream type: single video stream or composite stream
Audio input:1CH line/MIC
Audio output:1CH line, Headphone output(optional)
User management supports the three-level password

Alarm

Alarm detect and action:Alarm input and output can support mobile sensing, Video Lost, date, time, and event trigger.
Action: (Relay Output control the peripheral equipment
Interface: 1CH alarm input, 1CH alarm output
Motion detection: Yes

Hardware

CPU: ARM+DSP
operate system: Embedded linux system
ROM:8M Bytes Flash ROM
RAM:32M Bytes SDRAM
WinDog: watch the voltage of system
Backup: USB1.1
Wireless WLAN(802.11G)(optional)
wireless CDMA(optional)
2CH SWITCH INPUT/OUTPUT(optional)
Power supply: DC 12V/1A
Power consumption: ≤4Watts(with antenna)
Dimension:136 * 86 * 50mm (excluding lenses)
Temperate:5—60 centigrade degree
Humidity:20-80%RH

SDK

Network SDK , DEMO software and its source code
Optional Product
Center management software(ImagineWorldClien)
Provide system and paly SDK, the user can do double empold according to demand
Supports transfer server and APS
Supports DDNS
Supports RS232 and RS485 transfer
Supports remote-file server, can realize remote Playback and download